Fender is undoubtedly the number one brand of electric guitars and basses.
It's beloved by countless top artists, including Eric Clapton, John Mayer, and Cory Wong.
The Stratocaster, released by Fender in 1954, was introduced as a derivative of the Telecaster, the original solid-body guitar.
Its innovative design and versatility have earned it a place among countless artists, and it has dominated music scenes across a wide range of genres since its introduction.
It is truly a representative electric guitar.
This model was made in the Custom Shop.
The Custom Shop is a special manufacturing department created to handle custom orders.
They use their advanced technical skills to produce superior guitars to meet the demands of professional artists and guitar dealers.
Their high quality is highly regarded by artists worldwide.
This model is the signature model of Eric Clapton, one of the world's three greatest guitarists.
Manufactured in 2000, this is one of the original models, differing from current models.
The body is made of alder and the neck is a one-piece maple.
The neck shape is a soft V, the fingerboard radius is 9.5 inches, and it has 22 frets.
While it has a traditional look, the design for playability is modern.
The neck grain is beautiful, and it's clear at a glance that high-quality wood is used.
The neck heel also has a JC stamp, suggesting that John Cruz selected and inspected it.
The pickups are Fender Lace Sensor.
Compared to standard single-coil pickups, they are characterized by low noise and high output.
The controls feature a TBX control and mid-boost circuit.
This allows for a wide range of output, from a fat sound comparable to a humbucker to a bright sound that is typical of Fender.
This is an ever-popular model among the many signature models.
Don't miss this opportunity!
Approximately 70% of the frets remain.
The truss rod and neck are in good condition.
The body and finish show signs of wear, including scratches and dents overall. There is a 5mm dent on the top of the body, and a 6mm dent and a 3mm dent on the neck. There is tarnish and rust on the metal parts. There is a scratch on the truss rod access hole. It is unclear if this is from shipping, but it is slightly off-center. The pickguard has numerous scratches from playing and some fading.
There is a 2mm dent on the back of the body and a large scratch near the pickguard on the 1st string side.
Controls: 1 volume, 1 TBX control, mid-boost, 5-way selector
Nut width: 42mm
Bridge string spacing: 10.5mm
This guitar will be adjusted for optimal playability by the artisans at Guitar Shop TONIQ before delivery.
Serial number: #CN94164
Weight: 3.64kg
Frets: 70% remaining
Truss rod: Good working condition
Neck condition: Good
Controls: 1 volume, 1TBX control, mid boost, 5-way selector
Body condition: There are scratches and dents throughout, approximately 5mm dents on the top of the body, approximately 6mm dents, and approximately 3mm dents on the neck. There is dullness and rust on the metal parts. There is a scratch on the truss rod access hole. I'm not sure if it was from the time of shipment, but there is a slight shift in the center. Many scratches on the pickguard.
Nut width: 42mm
String spacing: 10.5mm
Year: 2000
Accessories: Soft case
Country of origin: America
Accessories: Soft case
Text: Teppei Ozawa
Inspector: Ozawa
TONIQ 3-month warranty
Ships in a sturdy cardboard box. We also ship internationally.
Items will be packed in a hard cardboard box.
We ship internationally.
Contact Information
TEL: 045-548-3776
Email: ozawa@bassick.jp
It's beloved by countless top artists, including Eric Clapton, John Mayer, and Cory Wong.
The Stratocaster, released by Fender in 1954, was introduced as a derivative of the Telecaster, the original solid-body guitar.
Its innovative design and versatility have earned it a place among countless artists, and it has dominated music scenes across a wide range of genres since its introduction.
It is truly a representative electric guitar.
This model was made in the Custom Shop.
The Custom Shop is a special manufacturing department created to handle custom orders.
They use their advanced technical skills to produce superior guitars to meet the demands of professional artists and guitar dealers.
Their high quality is highly regarded by artists worldwide.
This model is the signature model of Eric Clapton, one of the world's three greatest guitarists.
Manufactured in 2000, this is one of the original models, differing from current models.
The body is made of alder and the neck is a one-piece maple.
The neck shape is a soft V, the fingerboard radius is 9.5 inches, and it has 22 frets.
While it has a traditional look, the design for playability is modern.
The neck grain is beautiful, and it's clear at a glance that high-quality wood is used.
The neck heel also has a JC stamp, suggesting that John Cruz selected and inspected it.
The pickups are Fender Lace Sensor.
Compared to standard single-coil pickups, they are characterized by low noise and high output.
The controls feature a TBX control and mid-boost circuit.
This allows for a wide range of output, from a fat sound comparable to a humbucker to a bright sound that is typical of Fender.
This is an ever-popular model among the many signature models.
Don't miss this opportunity!
Approximately 70% of the frets remain.
The truss rod and neck are in good condition.
The body and finish show signs of wear, including scratches and dents overall. There is a 5mm dent on the top of the body, and a 6mm dent and a 3mm dent on the neck. There is tarnish and rust on the metal parts. There is a scratch on the truss rod access hole. It is unclear if this is from shipping, but it is slightly off-center. The pickguard has numerous scratches from playing and some fading.
There is a 2mm dent on the back of the body and a large scratch near the pickguard on the 1st string side.
Controls: 1 volume, 1 TBX control, mid-boost, 5-way selector
Nut width: 42mm
Bridge string spacing: 10.5mm
This guitar will be adjusted for optimal playability by the artisans at Guitar Shop TONIQ before delivery.
Serial number: #CN94164
Weight: 3.64kg
Frets: 70% remaining
Truss rod: Good working condition
Neck condition: Good
Controls: 1 volume, 1TBX control, mid boost, 5-way selector
Body condition: There are scratches and dents throughout, approximately 5mm dents on the top of the body, approximately 6mm dents, and approximately 3mm dents on the neck. There is dullness and rust on the metal parts. There is a scratch on the truss rod access hole. I'm not sure if it was from the time of shipment, but there is a slight shift in the center. Many scratches on the pickguard.
Nut width: 42mm
String spacing: 10.5mm
Year: 2000
Accessories: Soft case
Country of origin: America
Accessories: Soft case
Text: Teppei Ozawa
Inspector: Ozawa
TONIQ 3-month warranty
Ships in a sturdy cardboard box. We also ship internationally.
Items will be packed in a hard cardboard box.
We ship internationally.
Contact Information
TEL: 045-548-3776
Email: ozawa@bassick.jp